Losse Hulp stukken

HYDRAULIC BRAKE LIGHT SWITCH. WITH T FITTING

This is a brake light pressure switch with 3/16” inverted flare tee. This component detects pressure when braking and lights up the rear brake lights.

​

UNIVERSAL BRASS DISC/DRUM PROPORTIONING VALVE

Brass Disc/Drum Prop Valve, Same as the Original GM # 25509419 , PV2 or AC Delco 172-1353

(2)x 3/8-24 ports for front left and right caliper and (1) x 9/16-18 port for the rear…

UNIVERSAL BRASS DISC/DISC PROPORTIONING VALVE

Brand new brass proportioning valve Disc Disc brake GM applications.

It performs all the necessary functions when using disc brakes in the front and in the rear.

∙ Reproduction…

POWER BRAKE VACUUM SUPPLY FITTING, DUAL PORT

When converting from manual brakes to power brakes, a vacuum source is required. This fitting goes on the back of the manifold and diverts vacuum generated by the engine to the brake…

POWER BRAKE VACUUM SUPPLY FITTING, SINGLE PORT

When converting from manual brakes to power brakes, a vacuum source is required. This fitting goes on the back of the manifold and diverts vacuum generated by the engine to the brake…

GM PROPORTIONING VALVE BLEED TOOL, AC DELCO

Proportioning Valve Bleed Tool is designed to replace the warning light switch (white plug) on the proportioning valve during the brake bleeding process. After the bleeding process is…

GM MASTER CYLINDER REBUILD KIT, 1" DEEP BORE

Now available is our GM Corvette style disc brake master cylinder rebuild kit. This kit is for twin bail master cylinders with a 1.00" deep bore piston.

Includes:

∙ 1.00" Deep bore…

9/16" & 1/2" PROPORTIONING PROP VALVE STEEL LINES ZINC

∙ ZINC 1/8" BRAKE LINES FOR MOUNTING PROPORTIONING VALVE ON LEFT SIDE OF MASTER CYLINDER
∙ ALL LINES ARE PRE-BENT TO FIT
∙ PRE BENT LINE SPECS ARE: 1/2" TO 1/2" & 7/16"…

PROPORTIONING PROP VALVE STEEL LINES CHROME

∙ CHROME 1/8" BRAKE LINES FOR MOUNTING PROPORTIONING VALVE ON LEFT SIDE OF MASTER CYLINDER
∙ ALL LINES ARE PRE-BENT TO FIT
∙ PRE BENT LINE SPECS ARE: 1/2" TO 1/2" & 7/16" TO…

ADJUSTABLE DISC BRAKE PROPORTIONING VALVE 3/8''-24, 100-1000 PSI BLACK

Adjustable Prop Valve In/Out clearly marked

This valve goes in the rear brake line and adjusts the pressure to the rear Disc brakes

Pressure adjustments…

WILWOOD DISC BRAKES - RESIDUAL PRESSURE CHECK VALVE
BLUE. 2LB.

Brake fluid bleed back causes an initial low brake pedal feel and excessive brake pedal travel. The 2lb valve is for disc brake applications and keeps fluid from…

WILWOOD DISC BRAKES - RESIDUAL PRESSURE CHECK VALVE
YELLOW. 4LB

Brake fluid bleed back causes an initial low brake pedal feel and excessive brake pedal travel. The 2lb valve is for disc brake applications and keeps fluid from…

DISC BRAKES - RESIDUAL PRESSURE CHECK VALVE
RED. 10 LB

Brake fluid bleed back causes an initial low brake pedal feel and excessive brake pedal travel. The 2lb valve is for disc brake applications and keeps fluid from flowing back…

RESIDUAL PRESSURE CHECK VALVE FOR BRAKE SYSTEM
BLUE DISC ( 2LB )

These residual check valves reduce brake fluid bleed back which is caused by drum brake return springs and road vibration. Bleed back causes an initial low brake…

UNIVERSAL BRAKE CLEVIS 2.25''

2-1/2"LONG PEDAL ROD EXTENSION, 3/8" DIAMETER HOLE

Universal Pedal Rod Extension clevis rod

∙ 2-1/2" Length = 63.5 mm
∙ 3/8" Diameter hole = 9.52 mm
∙ 3/8- 24 Threads
∙ Zinc Finish

4-3/4"LONG PEDAL ROD EXTENSION

This universal fit rod is ideal for firewall mounted brake boosters or under the floor situations when you need a few more inches out of the booster rod to reach the pedal. Rod can be cut to a…

BRAKE FLUID -- HEAVY DUTY -- DOT 3 FORMULATION; 32OZ

∙ Heavy Duty DOT 3 formulation
∙ High Dry Boiling Point 401 degrees Fahrenheit / 205 degrees Celsius
∙ Minimum Wet Boiling Point 284 degrees Fahrenheit / 140 degrees…