Schokbrekers & aanslag rubbers

Front Shock Absorber for Chevrolet & GMC Truck 1949-54

Compressed Length 10.56" = 268 mm
Travel Length 7.11" = 180 mm
Fully Open Length 17.67" = 448 mm
Shock Stroke 7.11" = 180 mm
Dust Shield Yes
Shock Absorber Body End Measuring…

Shock Absorber for 1/2 ton Chevrolet / GMC Truck 1949-54 RearFit these ,

Boot Included Yes
Collapsed Length (IN) 13.34
Extended Length (IN) 22.7
Gas Charged Yes
Installation Hardware Included Not Required
Strut Mounting Type…

Front Shock Absorber for 1955-59 Chevrolet & GMC Truck

Compressed Length 12.37"
Travel Length 7.86"
Fully Open Length 20.23"
Shock Stroke 7.86"
Dust Shield No
Shock Absorber Body End Measuring Point Center Eye
Shock Absorber Rod…

REAR SHOCK ABSORBER 1955-80 CHEVROLET & GMC TRUCK

Compressed Length 13.87"
Travel Length 9.36"
Fully Open Length 23.23"
Shock Stroke 9.36"
Dust Shield Yes
Shock Absorber Body End Measuring Point Center Eye
Shock Absorber Rod End…

SCHOKBREKER VOORKANT. 1960-62

Dust Shield Yes
Shock Absorber Body End Measuring Point Ring Center
Shock Absorber Rod End Measuring Point Ring Center
Lower Mount Type Eyelet
Upper Mount Type Eyelet
Adjustable No
Coil Over Springs…

SHOCK ABSORBER-FRONT 1963-86

Extended Length in Inches 14.64 = 372 mm
Collapsed Length in Inches 9.53 = 242 mm
Stroke 5.11
Upper Mtg Code ES24
Lower Mtg Code EB7
Dust Tube Yes

SHOCK ABSORBER-REAR 1955-80

Chevrolet Truck 1955-80

Ford Truck 1947-67

Compressed Bumper Stop No
Compressed Length 12.000"
Cylinder Included No
Dust Shield Yes
Dust Shield Material Metal
Extended Bumper Stop No
Extended…

SCHOKBREKERS. C10 C30 1963-86 VOORKANT
LENGTE 382 MM

Extended Length 15.01" = 38.12 cm
Collapsed Length 9.95" = 25.27 cm
Stroke 5.06" = 12.85 cm

SHOCK ABSORBER MAX-AIR; SOLD IN PAIRS.

Dust Shield Yes
Extended Length (in.) 23.000
Lower Mounting Description Loop Bushing & Sleeve Mount - 9/16" Sleeve ID X 1.5/8" Sleeve OAL
Compressed Length (in.) 14.000
Travel Length (in.)…

LOWER FRONT SHOCK MOUNT-PAIR LEFT & RIGHT SIDE 1947-54

Set van 2 stuks ( Linker & Rechter Zijde )

Lower Shock Mount for 1947-54 Chevy TruckThese are "heat forged" and stamped as original.

Two required per 1/2 ton. Sold each.

SHOCK ABSORBER STUD MOUNT

These shock mount studs are made from OEM grade material and fit all 5/8" x 1 1/4" eye holes.

Can be used as a stock replacement or as a custom fabrication

CHEVROLET & GMC TRUCK 1955-59 FRONT SHOCK MOUNT KIT

Our 1955-59 Chevrolet & GMC truck front shock mount kit is used when running our Power Steering Kit #PSK4759 or as an upgrade to the original type shock. Allows you to run…

Upper Shock Mount - Front & Rear 1947-54 Chevrolet & GMC Truck

COIL SPRING/REAR RETAINER 1960-72

Chevrrolet Truck 1960-72

CHEVROLET & GMC TRUCK, 1963-72 C10 TRUCK REAR COIL SPRING RETAINERS

1963-1972 Chevrolet C10 Truck

Rear Coil Spring Retainers

Replacing the old Spring retainers with new ones assures you that the coil spring will not move around…

1947-49 SHOCK ABSORBER LINKSteel linkage arm for knee action shocks. Includes 2 shock link grommets.These are used on the front!!

1930-49 SHOCK LINK GROMMETS Rubber grommets for knee action shock linkage. With brass sleeve and steel pins as original. One set does one shock absorber link. Sold Each / Per/stuk

Axel to Frame Bumper Front, 1947-55 (1st) Chevy/GMC (1/2 ton) TruckThis front axel to frame bumper is made for your 1947-55 (1st series) Chevy/GMC 1/2 ton truck.

∙ 1947-55 (1st)
∙ Chevy/GMC (1/2 ton) Truck
∙ Axel to Frame…

Rear Axle Bumper for Chevrolet Truck

Large rubber bumper cushions axle to frame. Application Guide: Fits Rear 1953-55 1st series 3/4-1 ton pickups and also fits Front or Rear of 1955 2nd series to 1959 pickups.

Sold Each. (…

Axle Bumper Hardware Kit for 1953-59 Chevrolet / GMC Truck

HARDWARE FOR ATTACHING AXLE BUMPER TO FRAME. 1 KIT DOES 1 BUMPER. APPLICATION GUIDE: FITS REAR 1953-55 1ST SERIES PICKUPS 3/4-1 TON AND ALSO FITS FRONT OR REAR OF 1955…

CONTROL ARM BUMPER-UPPER FOR CHEVROLET TRUCKFits:
(1960-72) C10 & C20
(1973-87) C20 & C30
(88-91) Suburban, crew cab R 20 & 30 series.

Control Arm Bumper for 1963-91 Chevrolet TruckLower control arm bumper

Fits:
1963-87 C10-C30
63-87 pickup trucks
88-91 Blazer, Suburban, & crew cab R series.

AXEL TO FRAME BUMPER FRONT 1963-72 CHEVROLET & GMC TRUCK

This rear axel to frame bumper is made for your 1963-72 Chevrolet & GMC (1/2 ton 2WD) truck, 1967-69 (1/2-3/4 ton 4WD) truck, 1970-72 (3/4 Ton) truck and 1970-72…